SU Carburettor Throttle Spindle Screw P/N AUC1358 Sold per PAIR [2 screws] As used in: OM, HV3, HV5, HV8, H, H Thermo, H8, HD, HS, HS8, HIF, KIF, All Series..
$8.00
Ex Tax:$7.27
SU Carburettor Steel Washer P/N AUC1388; For bowl mounting stud used on some H type carburettors using AUC1387 Stud In illustration below Stud AUC1387 is No.45 This washer is No. 47 lower washer ..
$4.00
Ex Tax:$3.64
SU Carburettor Steel Washer P/N AUC1389; For bowl mount on H type using AUC1387 alternative mounting Stud In illustration below Stud AUC1387 is No. 45 This washer is No. 48 upper washer ..
$5.00
Ex Tax:$4.55
SU Carburettor Bowl Gasket fits T1 bowl 1-3/4" Dia P/N AUC1412 As fitted to OM and H Type Carburettors ..
$3.00
Ex Tax:$2.73
Hot
SU Carburettor Rubber Grommet P/N AUC1534; Suits H Type bowl when using AUC1387 or AUC1335 mounting Bolt. NOTE: these grommets are only used on certain vehicles and NOT supplied in most gasket or rebuild kits.The price is per grommet. 2 grommets required per carburettor ..
$5.50
Ex Tax:$5.00
SU Carburettor Alloy Washer P/N AUC1557 As used with: Long Bowl Lid Bolt AUC1867 In these SU Carburettors: OM; HV3; HV5; H; H Thermo; H8; HD..
$3.00
Ex Tax:$2.73
SU Carburettor Fuel Bowl Holding Bolt suits H; OM; HV3; H Thermo Type, alternative P/N AUC1541 As used by all early SU Carburettors other than those using T4 fuel bowls Holds fuel bowl to body Diameter 7/16” BSF thread In illustration below it is No. 38 ..
$19.00
Ex Tax:$17.27
SU Carburettor Fibre Washer P/N AUC1928 Serrated for float bowl lid nut on OM; H; HD; HV3; As used with overflow pipe fitted and long holding bolt SEE BELOW..
$3.00
Ex Tax:$2.73
SU Carburettor Float Lever Copper Plated P/N AUC1981 Suits T1 Bowl As used in OM, HV, H and HD Carburettors This lever is 1.15" Long O/all..
$38.50
Ex Tax:$35.00
SU Carburettor Taper Pin throttle stop to shaft OM, HV3, HV5, HV8, H, H Thermo, H8, HD P/N AUC2106..
$3.00
Ex Tax:$2.73