![SU Carburettor Steel Washer for bowl mount [AUC1389]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC1389-Washer-Steel-SU-250x250w.jpg "SU Carburettor Steel Washer for bowl mount [AUC1389]")
SU Carburettor Steel Washer for bowl mount [AUC1389]For bowl mount on H type using AUC1387 alternative mounting Stud ..
$5.00
Ex Tax:$4.55
![SU Carburettor Bowl Gasket - T1 bowl 1-3/4" [AUC1412]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/SU-Carb-Bowl-Gasket-AUC1412-001-250x250w.jpg "SU Carburettor Bowl Gasket - T1 bowl 1-3/4\" [AUC1412]")
SU Carburettor Bowl Gasket - T1 bowl 1-3/4" [AUC1412]As fitted to OM and H Type Carburettors..
$3.00
Ex Tax:$2.73
![SU Carburettor fuel bowl mounting Rubber Grommet [AUC1534]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC1534-Grommet-HS-SU-1--250x250w.jpg "SU Carburettor fuel bowl mounting Rubber Grommet [AUC1534]")
Hot
SU Carburettor fuel bowl mounting Rubber Grommet [AUC1534]Suits H Type bowl when using AUC1387 or AUC1335 mounting Bolt. NOTE: these grommets are only used on certain vehicles and NOT supplied in most gasket or rebuild kits.The price is per grommet. 2 grommets required per carbure..
$5.50
Ex Tax:$5.00
![SU Carburettor Alloy Washer, Bowl Lid Bolt [AUC1557]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC1557-250x250.jpeg "SU Carburettor Alloy Washer, Bowl Lid Bolt [AUC1557]")
SU Carburettor Alloy Washer, Bowl Lid Bolt [AUC1557]As used with: Long Bowl Lid Bolt AUC1867 In these SU Carburettors: OM; HV3; HV5; H; H Thermo; H8; HD..
$3.00
Ex Tax:$2.73
![SU Carburettor Bowl Holding Up Bolt [AUC1541]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC1541-Bowl-Bolt-SU-2--250x250w.jpg "SU Carburettor Bowl Holding Up Bolt [AUC1541]")
SU Carburettor Bowl Holding Up Bolt [AUC1541]As used by all early SU Carburettors other than those using T4 fuel bowls Holds fuel bowl to body Diameter 7/16” BSF thread ..
$19.00
Ex Tax:$17.27
![SU Carburettor Clamp Assembly [AUC1923]](https://www.classiccarbs.com.au/image/cache/catalog/SU%20Carburettors/AUC/AUC1923-250x250.jpg "SU Carburettor Clamp Assembly [AUC1923]")
SU Carburettor Clamp Assembly [AUC1923]Throttle and Choke Assembly. 1 x 5/16" bore end, 1 x 1/4" bore end. For 1/4" SpindlesInclude clamp, screws, washers & nuts..
$55.00
Ex Tax:$50.00
SU Carburettor Clamp Assembly [AUC1924]Throttle and Choke Assembly. For 5/16" SpindlesInclude clamp, screws, washers & nuts..
$55.00
Ex Tax:$50.00
![SU Carburettor Fibre Washer, Serrated, bowl lid nut [AUC1928]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC1928-Serrated-fibre-washer-SU-2--250x250w.jpg "SU Carburettor Fibre Washer, Serrated, bowl lid nut [AUC1928]")
SU Carburettor Fibre Washer, Serrated, bowl lid nut [AUC1928]Serrated for float bowl lid nut on OM; H; HD; HV3; As used with overflow pipe fitted and long holding bolt..
$3.00
Ex Tax:$2.73
![SU Carburettor Float Lever, Copper Plated [AUC1981]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC1981-250x250.jpeg "SU Carburettor Float Lever, Copper Plated [AUC1981]")
SU Carburettor Float Lever, Copper Plated [AUC1981]Suits T1 Bowl As used in OM, HV, H and HD Carburettors This lever is 1.15" Long O/all..
$38.50
Ex Tax:$35.00
SU Carburettor Float Lever, Stainless [AUD2299]Later stainless steel float fork for T1 Bowl lids (2" diameter) As used in OM, HV, H and HD Carburettors This lever is 1.15" Long O/all..
$16.50
Ex Tax:$15.00
![SU Carburettor Taper Pin throttle stop [AUC2106]](https://www.classiccarbs.com.au/image/cache/data/SU%20Carburettors/AUC/AUC2106-250x250.jpeg "SU Carburettor Taper Pin throttle stop [AUC2106]")
SU Carburettor Taper Pin throttle stop [AUC2106]..
$2.75
Ex Tax:$2.50